6.4. Performance Tuning

Performance tuning and changing other configuration parameters is often done via /etc/modprobe.d files.
These parameters are typically set in the YAML used to deploy the node pool Targets, but they may need to be altered later on.
In the AKS environment, use the following command to edit the configuration parameters typically tuned via options in such files:

kubectl edit nvmesh cluster1

and edit the field spec.core.moduleParams.

For an example for the contents, see https://github.com/Excelero/nvmesh-k8s-operator/blob/v0.8.0/deploy/samples/nvmesh/nvmesh_v1_AKS_tcp.yaml.